51 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Binding type
Note
This menu line is only visible until NO receiver is actually bound to
the active model memory.
A non-bound model memory can be changed at any time from the
default memory-specific HoTT synchronization to transmitter-spe-
cific, and vice versa.
• "Global", also all the transmitter specific bound receivers react
to the signals of each model memory of "their" transmitter.
• "Model" specific bound receivers react exclusively to the signal
coming from the specifically assigned model memory. An acci-
dental use thorough a non specifically assigned model memory
is NOT possible.
The binding type assigned to a model memory is indicated in the
model selection by an "M" or "G" to the right of the model name.
Programming step-by-step
1. Push the ENT key.
2. Use the selection keys to select "model" or "global".
3. Push the ENT key.
RF module
ON
model
Binding type
Rcv output
Bind
–––
Range test
99s
0 3
0 4
ULTIMATE
02
GRAUBELE
STARLET
BELL4 7 G
R1 2
R1 2
–––
R1 2
M
M
G
M
0 1
0 5
–––
M
0 6
–––
M
Alpha 110
Xcell 220
To Next Page
Loading...
Need help?
General