24 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Notes
• This deletion cannot be restored. All of the data in the selected
model memory are completely deleted.
• If the currently active model memory is deleted, a model type
must be defined immediately afterwards. If an inactive model
memory is deleted, soon after the model selection appears
"àààfreeààà".
Copy Mod=>Mod
Push the ENT button to recall the occupied model memories.
Push the ESC key to stop the procedure.
Programming step-by-step
1. Select the model to copy using the selection keys.
2. Confirm the selection by pushing the ENT button.
3. Possibly, the warning message "Switch receiver OFF first" is dis-
played.
Push the ESC key to stop the procedure.
Push the ENT button to switch the RF off.
Note
For safety reasons, however, a receiving system, which may be
in operation, must first be switched off.
4. Select the target memory using the selection keys.
5. Confirm the selection by pushing the ENT button.
It appears a safety query.
6. Push the ESC key to confirm "NO" and stop the procedure.
Selecting "YES" with the right selection key and then pressing the
ENT key will copy the selected model memory.
Model select
Delete model
Copy Mod–>Mod
=>
=>
=>
=>
=>
Model name
GRAUBELE
03
04
05
frei
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
Copy of model:
R12
R12
–––
R12
M
M
G
M
01
Should the model
GRAUBELE
be copied ?
NO
YES
01
To Next Page
Loading...
Need help?
General