23 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Note
If the actually active model memory is deleted, soon after the dele-
tion process it must be defined a favorite model type. This selection
can also be restored by switching the transmitter off. After all, the
unwanted occupied model memory is to be erased from another
memory.
Model name
You can insert a maximum of nine characters for a model name of
the active model memory. The entered model name is displayed in
the basic display of the transmitter and in the model selection.
Push the ENT button to come back to the related sub-menu.
Push the ESC key to stop the procedure.
Programming step-by-step
1. Set the desired character through the selection keys.
2. Confirm the selected character through the ENT button.
3. Set the following character through the selection keys.
Simultaneously pushing the left and the right selection keys
lets the cursor jump to the place where an empty space is.
Within the input field, any desired character position can be
selected with the upper or lower selection key.
4. Press the ESC key to close the submenu.
Delete model
Push the ENT button to recall the occupied model memories.
Push the ESC key to stop the procedure.
Programming step-by-step
1. Select the model to be deleted with the upper or lower selection
button.
2. Confirm the selection by pushing the ENT button.
It appears a safety query.
3. Push the ESC key to confirm "NO" and stop the procedure.
Selecting "YES" with the right selection key and then pressing the
ENT key will erase the selected model memory.
Model select
Delete model
Copy Mod–>Mod
=>
=>
=>
=>
=>
Model name
!"#$%&’()+,–./0123
456789:;
Model name
GRAUB
FGHIJKLMNOPQRSTUVWX
YZ[¥]^_`abcdefghijk
?@ A
B CDE
Model select
Delete model
Copy Mod–>Mod
=>
=>
=>
=>
=>
Model name
GRAUBELE
03
04
05
frei
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
Model to delete:
R12
R12
–––
R12
M
M
G
M
01
Should the model
GRAUBELE
be deleted ?
NO
YES
01
To Next Page
Loading...
Need help?
General