EasyManuals Logo

GRAUPNER mz-12 PRO User Manual

GRAUPNER mz-12 PRO
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
73 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
Once this process has concluded, "ON" appears in both displays
instead of the flashing "BIND"
Both transmitters can then return to the basic display and com-
mence training after a thorough check of all functions.
If only one or neither transmitter displays "ON" indicating that the
binding process failed, change the positions of the two transmitters
and repeat the entire procedure.
Training operations
During the training mode teacher and pupil can maintain a comfort-
able distance. The "earshot" distance (a maximum of 50 m) should
not be exceeded, and no one should be between the teacher and
pupil since this would reduce the range of the feedback channel
used to connect the two transmitters.
If the connection to the teacher transmitter is completely lost and
the T/P switch is in the "pupil" position, the Graupner logo of the
teacher's transmitter starts to flash in a frantic red for the duration
of the signal loss and acoustic warning signals are emitted. In addi-
tion, "RFC-" flashes in the basic display and the warning message "No
pupil signal" is shown in the display.
In such a case you should provide a smaller distance between both
transmitters. If it does not help, you should immediately stop the use
of the model and search for the reason.
Announce
Push the ENT key to recall the selection menu from the base display.
Select the desired menu with the selection buttons, then press the
ENT button again to recall the setting list of the menu.
Push the ESC key to stop the procedure.
The transmitter is delivered with a basic selection of voice announce-
ments. This selection can be supplemented by self-generated
announcements in .wav or .mp3 format using the "Firmware_
Upgrade_grStudios" program from the PC or laptop.
In the seven lines of this menu, one announcement can be assigned
to each of the two switching positions of a switch.
M-01
0:12h
Stop
Flug
0:00
0:00
5.5V
4.5V
LS
5.1V
RFC–Lehr.
GRAUBELE
normal
No
pupil
signal
Trainer
Fail-
Safe
General
setting
Free
Mixer
An-
nounce
Info-
display
1
2
3
4
Announce file
–––
–––
–––
–––
–––
5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GRAUPNER mz-12 PRO and is the answer not in the manual?

GRAUPNER mz-12 PRO Specifications

General IconGeneral
BrandGRAUPNER
Modelmz-12 PRO
CategoryRadio
LanguageEnglish

Related product manuals