105
MIDI
MIDI CHANNEL
MIDI has 16 “Channels”. Information divided into 16 channels can be transmitted
through one MIDI cable.
e channel must match between the sender and the receiver. If not, the machines
can not “hear” what the other “says”.
MAIN MIDI MESSAGE
e MIDI information is grouped into a channel message per each of the 16 channels
and a system message for all channels. ere are more details in the MIDI IMPLE-
MENTATION CHART.
CHANNEL MESSAGE
NOTE ON
is data tells: which key (Note Number) is played, at what speed (Velocity) and the
strike/release (Note On/O ).
PROGRAM CHANGE
Control Channel:
Switches the internal Patches of the SKX.
External Zone Channel:
Switches the external MIDI equipment’s Patches.
CONTROL CHANGE
e messages are transmitted (sent or received) in accordance with the motion of
select controls on the top panel, any foot or auxiliary pedals, or any MIDI controller
information.
SYSTEM MESSAGE
SYSTEM EXCLUSIVE MESSAGE
is message is for transmitting the particular data between compatible equipment of
the same model or same make.
e SKX can do a memory dump (= sending the total information compliment on-
board) and recording them to an external sequencer.
To Next Page
Loading...
Need help?
General
