Hammond SKX User Manual


Skx
Owner’s Manual
122
LOADING A PATCH
Locate the Patch  le mode with refer to the illustration of the
top of previous page.
Select the Patch  le to load with the [],[] buttons or the
[VALUE] knob, and press [ENTER].
NOTE: If you do this operation, a Patch in the SKX are replaced with
the newly loaded Patch. Therefore, it is recommended that
you save your settings before loading a new Patch. (p. 121)
Select the Patch number to be replaced.
Press the [ENTER] button.  e Patch is loaded.
DELETING THE PATCH
Select the Patch  le to delete with the [],[] buttons or the
[VALUE] knob.
Press [] button once. “[ENT] to Delete” is displayed.
Press the [ENTER] button. “Delete?” is displayed. Now
press the [ENTER] button again.  e Patch is deleted.
NOTE: If you do not with to delete the Patch, press the [MENU/EXIT]
button.
To locate the Patch mode, please refer to the illustration of the
top of previous page.
① INSERT THE USB FLASH DRIVE
Make sure that the USB Flash drive is correctly inserted.
② LOCATE THE PATCH FILE MODE
③ SELECT THE PATCH FILE
④ SELECT THE NUMBER TO REPLACE
① INSERT THE USB FLASH DRIVE
Make sure that the USB Flash drive is correctly inserted.
② LOCATE THE PATCH FILE MODE
③ SELECT THE PATCH FILE
④ SELECT THE OPERATION
⑤ PRESS [ENTER] TO DELETE

Hammond SKX Specifications

General

Manuals	2
Drawbars	9 per manual
Power Supply	AC Adapter
Effects	Chorus, Vibrato, Reverb
Connectivity	USB, MIDI, Audio Out, Headphones, Expression Pedal
Keyboard	61 keys (waterfall style)
Piano/Ensemble Section	Pianos, Strings, Brass
Display	LCD
Touch Sensitivity	Adjustable