Skx
Owner’s Manual
118
WORKING WITH SETUPS
Save or Load the Setups to/from the USB Flash drive in the SETUP mode.
To locate this mode:
HOW TO READ THE DISPLAY
SAVING THE SETUP
Make sure that the USB Flash drive is correctly inserted.
Locate the SETUP mode. A Setup le name will displayed.
WHAT DOES THIS MEAN?
USB is not ready.
USB Flash drive is not correctly inserted.
Select the “New File” by pressing the [] button (or turning
the [VALUE] knob) a few times.
If you have Voice Libraries loaded into the SKX and want to
save those as part of your Setup, press the [] button to display
the “TYPE” and use the [VALUE] knob to change the value
from “SETUP” to “WHOLE”. en press the [] button and
return to the le display mode.
If you press the [ENTER] button, it is
saved. With the WHOLE le, it can take
up to 30 minutes maximum for saving.
A temporary name “SETUPxx” is automatically given to the
saved setup le.
MENU/
EXIT
ENTER
① INSERT THE USB FLASH DRIVE
② INSERT THE USB FLASH DRIVE
③ SELECT “NEW FILE”
④ SELECT THE FILE TYPE
⑤ PRESS [ENTER] TO SAVE
⑥ COMPLETED
SETUP name
This indicates another SETUP
le above or below the current
one.
Type of File
SU: only the Setup
WH: includes Library
What you are going to operate
This indicates another page on the
right (or left).
To Next Page
Loading...
Need help?
General
