Skx
Owner’s Manual
130
WHAT IS VOICE LIBRARY?
You can add new sounds to the Extra Voice sections by installing “Voice Libraries” to
the instrument from a USB Flash Drive. ese additional voices are accessed using
the [LIBRARY] buttons of the Extra Voice sections.
Voice Libraries are available for download on the Hammond Organ website. Several
instruments are pre-loaded as a default settings (P. 136).
FILE TYPE AND THE PLACING FOLDER
FILE TYPE
e Voice Library is o ered in the following types:
“Libxxxxx.SYS” (xxxxx is name of Voice Library)
If the le is compressed in some way, you must expand it before it is ready
for use.
PLACING FOLDER
When you insert the USB Flash drive to the SKX, the folder of the Voice
Library is automatically created.
\HAMMOND\SKX\LIB
Copy the library le you want to add here using the personal computer.
e SKX can identify up to 99 les.
VOICE LIBRARY AND SETUPS
You can record settings created with the Voice Library to the Patches. If the contents
of the Voice Library change, the sound of the Patch becomes di erent from that of
the recorded one.
e memory dump or the USB Flash drive is used for saving and loading the setups.
However, if you want to save/load including the Voice Library, be sure to record as
WHOLE to the USB Flash drive. (P. 118 - 4) e contents of the Voice Library are not
recorded in any other way.
HANDLING THE USB FLASH DRIVE
See the previous paragraph “Save your setup” for
the handling details of the USB Flash drive (P. 116).
MIX
BALANCE
EXV1 EXV2
LibVL-SKaaa.sys
LibVL-SKccc.sys
LibVL-SKbbb.sys
skx
hammond
setup
patch
lib
audio
twheel
system
COPY
and more...
To Next Page
Loading...
Need help?
General
