Hammond SKX - Lower to Pedal; Pedal Sustain

33
Getting Ready To Play
LOWER TO PEDAL
When a MIDI Pedalboard is connected to the SKX, you can play
the LOWER part sound (or “registration”) with the Pedalboard us-
ing the “LOWER TO PEDAL”.
[LOWER to PEDAL] BUTTON
Turns the Lower To Pedal function “ON” (LED lit) and “OFF”
(LED not lit).
 e default upper limit for Lower to Pedal is below Middle “B”.
NOTE: You can change the playing range (the upper limit) of the ‘Lower
to Pedal’. (P. 110 )
PEDAL SUSTAIN
When the [PEDAL SUSTAIN] button is “ON”, the PEDAL tones
will smoothly decay upon release, much in the manner of a string
bass.  is is a popular option for playing the PEDAL tones.
[PEDAL SUSTAIN]
Turns Pedal Sustain “ON” (LED lit) and “OFF” (LED not lit).
After releasing your foot from a Pedal note (or releasing your  nger
from the LOWER key when you are using Manual Bass, the sound
will slowly fade, or decay.
NOTE: You can adjust the Pedal Sustain. (P. 73 )
Lower to Pedal
Y
ER
Y
ER