Hammond SKX - Record to the Patch; Example: RECORD to U032


Skx
Owner’s Manual
60
RECORD TO THE PATCH
Example: RECORD TO “U032”
② PRESS THE [RECORD] BUTTON
Press the [RECORD] button. A prompt will appear in the dis-
play allowing you to select the Patch you want to record.
③ SELECT THE PATCH NUMBER
Press the [ENTER] button.  e Patch is con rmed and the
display will show the following for approximately ½ second:
Recording Patch...
When the recording is completed, the display returns to the
previous one.
NOTE: The recorded Patch data is retained if the power is switched
o or disconnected.
① ENTER THE NAME
Enter the name of the Patch. (P. 59)
Select the Patch number you wish to record with the [VALUE]
knob ( is time select U032) or type the buttons such as [3]
[2].
④ PRESS [ENTER]
PATCH - continued