HBK GEN7iB GEN Series User Manual

GEN7iB
126
ACQUISITION AND STORAGE
ACQUISITION AND STORAGE
9
B In the Stop of data recording area, select the On end of post-trigger check box (see
Fig. 9.21)
The recording stops after the post-trigger time has elapsed. A single sweep record-
ing directly to a drive, based on a single trigger.
Fig. 9.21 Stop of data recording
C Data for Group1 is recorded at 200 kS/s and stored, for Group 2 at 5 kS/s and also
stored (see Fig. 9.22).
In Perception V7 this was called “Circular recording”.
Fig. 9.22 Storage and timebase

HBK GEN7iB GEN Series Specifications

General

Brand	HBK
Model	GEN7iB GEN Series
Category	Measuring Instruments
Language	English