GEN7iB
174
INTERFACE/CONTROLLER
INTERFACE/CONTROLLER
11
Warnings
Before installing this device, please read and make sure that you have understood the
followingwarnings,whicharespecicforthisdevice.
Description of Electrostatic Discharge (ESD)
Electrostatic discharge (ESD) can cause damage to electronic devices if discharged into the
device. Take steps to avoid such an occurrence.
HBM uses state-of-the-art electronic components in its equipment. These electronic
components can be damaged by discharge of static electricity (ESD). ESD damage is quite
easy to induce, often hard to detect, and always costly. Therefore, we must emphasize the
importance of ESD preventions when handling a GEN7iB system, its connections or a plugin
card.
Laser Safety
The system is classiîž’ed as a Class 1 laser product. The SFP uses an optical light source
for data and command communication. It does not emit hazardous light, but it is recom-
mended to avoid direct exposure to the beam.
To Next Page
Loading...
Need help?
General
