Hioki 3159 - 10.1.2 Insulation resistance test portion

145
_____________________________________________________________________________________________
9.4 Command
______________________________________________________________________________________________
Syntax
:MEAS:INS:VOLT?
Response
syntax
<data>
<data>
Insulation resistance test measured voltage value (NR1)
Function
Queries the measured voltage value for insulation resistance tests.
Example
Queries the measured voltage value for insulation resistance tests.
Transmission :MEAS:INS:VOLT?
Queries the measured voltage value for insulation resistance tests.
Response 510
The measured voltage value is 510 V.
Syntax
:MEAS:INS:RES?
Response
syntax
<data>
<data>
Insulation resistance test measured resistance value (NR1)
Function
Queries the measured resistance value for insulation resistance tests.
Example
Queries the measured resistance value for insulation resistance tests.
Transmission :MEAS:INS:RES?
Queries the measured resistance value for insulation resistance tests.
Response 100
The measured resistance value is 100 MΩ.
Syntax
:MEAS:INS:TIM?
Response
syntax
<data>
<data>
Insulation resistance test time elapsed (NR1)
Function
Queries the test time elapsed for insulation resistance tests.
Example
Queries the test time elapsed for insulation resistance tests.
Transmission :MEAS:INS:TIM?
Queries the test time elapsed for insulation resistance tests.
Response 10.0
The test time elapsed is 10.0 s.
:MEAS:INS:VOLT?
Queries the measured voltage value for insulation resistance tests.
:MEAS:INS:RES?
Queries the measured resistance value for insulation resistance tests.
:MEAS:INS:TIM?
Queries the test time elapsed for insulation resistance tests.