6 Optional functions
Optional functions through Remote control
SMGB0099 rev.0 - 12/2016
214
Elem. Optional function
Individual
setting
Settings Setting conditions Description
F5
Automatic reset
temperature for cooling
X
19 19 °C
This function is used to set automatic
temperature reset in FAN/COOL/DRY
modes.
20 20 °C
21-24 (21-24) °C
25
25 °C
(factory setting)
26-28 (26-28)ºC
29 29ºC
30 30ºC
F6
Automatic reset
temperature for heating
Heating Automatic
Return Temperature
X
17 17ºC
This function is used to set automatic
temperature release in HEAT mode.
18-20 (18-20)ºC
21
21ºC
(factory setting)
25-28 (25-28)ºC
29 29ºC
30 30ºC
F7
Operation stoppage
prevention by remote
control switch operational
error
(5)
X
00 Not activated function
–
01 Activated function
F8
Lock function for
operation mode selection
X
00 Not activated function
This function is used to prevent
changes to the operating mode.
01
Activated function (factory
setting)
F9
Lock function for
temperature setting
X
00 Not activated function
This function is used to prevent
changes to the temperature setting.
01
Activated function (factory
setting)
FA
Lock function for fan
speed selection
X
00 Not activated function
This function is used to prevent
changes to the fan speed.
01
Activated function (factory
setting)
Fb
Lock function for swing
louver operation
X
00 Not activated function
This function is used to prevent
changes to automatic louver
operations.
01
Activated function (factory
setting)
FC
Lower limit of setting
temperature for cooling
Minimum value of setting
temperature in cooling
X
00 19ºC (Standard)
This function is used to dene a lower 
temperature setting limit for FAN/
COOL/DRY modes.
01 Lower limit 20ºC
02 Lower limit 21ºC
03-08 Lower limit (22~27)ºC
09 Lower limit 28ºC
10 Lower limit 29ºC
Fd
Upper limit of setting
temperature for heating
X
00 30ºC (Standard)
This function is used to dene an 
upper temperature setting limit for
HEAT mode.
RPC-FSN3E
RPF(I)-)FSN2E
RPI-FSN3(P)E
models up to 20ºC
01 Lower limit 29ºC
02 Lower limit 28ºC
03-10 Lower limit (27~20)ºC
11 Lower limit 19ºC
12 Lower limit 18ºC
FE Not available –
00
Not available
Use at 00 conditions
–
01
02
FF Not available –
00
Not available
Use at 00 conditions
01
H1 Not available –
00
Not available
Use at 00 conditions
01
H2 Indication of hot start O
00 Display
This function is used to display or
hide the automatic control indication.
01 Hide