Hitachi WJ200 Series

3−88
Input Function Summary Table
Option
Code
Terminal
Symbol
Function Name Description
77
GS1 * GS1 input ON EN60204-1 related signals:
Signal input of “Safe torque off” function.
OFF
78
GS2 * GS2 input ON
OFF
81
485 Start EzCOM ON Starts EzCOM
OFF No execution
82
PRG Executing EzSQ
program
ON Executing EzSQ program
OFF No execution
83
HLD Retain output
frequency
ON Retain the current output frequency
OFF No retention
84
ROK Permission of Run
command
ON Run command permitted
OFF Run command is not permitted
85
EB Rotation direction
detection (C007 only)
ON Forward rotation
OFF Reverse rotation
86
DISP Display limitation ON
Only a parameter configured in b038 is shown
OFF All the monitors can be shown
255
no No function ON (input ignored)
OFF (input ignored)