Hitachi WJ200 Series - Page 400

C−19
“b” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description Lnitial data Units
b164
Automatic return to the
initial display
10 min. after the last key
operation, display returns to the
initial parameter set by b038. Two
option codes:
00…Disable
01…Enable
9
00 -
b165
Ex. operator com. loss action Five option codes:
00…Trip
01…Trip after deceleration to a
stop
02…Ignore
03…Coasting (FRS)
04…Decelerates to a stop
9
02 -
b171
Inverter mode selection Three option codes:
00…No function
01…Std. IM (Induction Motor)
03…PM(Permanent Magnet
Motor)
U
00 -
b180
Initialization trigger
(*)
This is to perform initialization by
parameter input with b084, b085
and b094. Two option codes:
00…Initialization disable
01…Perform initialization
U
00 -
b190
Password Settings A
0000(Invalid Password)
0001-FFFF(Password)
U
0000 -
b191
Password authentication A 0000-FFFF
U
0000 -
b192
Password Settings B 0000(Invalid Password)
0001-FFFF(Password)
U
0000 -
b193
Password authentication B 0000-FFFF
U
0000 -