Honeywell Performance Series User Manual

Web Client Operation
177
Figure 12-47 Certificate Import - Confirmation Message
Viewing and Setting the HTTPS Port
Go to SETUP  NETWORK  Port.
Figure 12-48 Port Interface
Login Configurations
1. Open the browser, then enter https://xx.xx.xx.xx:port, where xx.xx.xx.xx is your device’s IP
or domain name.
The port is your HTTPS port. If you are using 443 (the default HTTPS value), then you do
not need to add port information here.
2. Enter https://xx.xx.xx.xx to access.
If you have the correct settings, then you should see the login interface.
Configuring WIFI
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*4/HEN
321*4/HEN642*4/HEN643*4.
Note
This section applies only to devices with Wifi capability, such as tablet
computers, smartphones, and laptop computers.
1. Go to SETUP  NETWORK  Wifi.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet