Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
178
Figure 12-49 Wifi Configuration Interface
2. Click to enable Wifi.
3. Double-click the name of a wireless device to connect to it.
4. Click OK to save your settings.
Note
Click
Refresh to update the list of wireless network information.
Configuring 3G
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*4/HE
N321*4/HEN642*4/HEN643*4.
1. Go to SETUP  NETWORK  3G.
2. Make any configuration changes needed and click OK to save the changes.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet