Honeywell Performance Series User Manual

Web Client Operation
205
Figure 12-75 WEB - Alarm Output Configuration Interface
2. Click to enable the alarm output for each alarm. Select from Auto, Manual, or Stop, and
Status.
3. Click OK to save these settings.
Configuring for Abnormalities
Click Abnormality under EVENT to open the Abnormality - HDD configuration interface.
Figure 12-76 WEB - HDD Abnormality Configuration Interface
There are seven types of abnormalities:
• No HDD
• HDD Error
• No Space
• Disconnect
• IP Conflict
• MAC Conflict
• Illegal Login
You can configure how the system responds to each kind of abnormality. The configuration is
similar for each type.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet