Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
204
Figure 12-73 WEB - IPC External Alarm Configuration Interface
Configuring IPC Offline Alarms
IPC Offline Alarms are the alarm signals when a connected IP camera goes offline. You
cannot select the sensor type or anti-dither functions.
1. Click IPC Offline Alarm in the ALARM configuration interface.
2. The configuration of IPC Offline Alarm options is very similar to the configuration for
Local Alarms. Please see Configuring Local Alarms on page 200 for more information on
setting time periods and event actions.
3. Click OK to save the settings.
Figure 12-74 WEB - IPC Offline Alarm Configuration Interface
Configuring Alarm Outputs
1. Click Alarm Output under SETTING to open the Alarm Output configuration interface.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet