Honeywell Performance Series User Manual

Web Client Operation
217
Figure 12-91 Holiday Settings Configuration Interface
2. Click Add Holidays to add a holiday, enter the holiday details, then click OK.
Configuring Display Settings
Display Settings
Click Display under System interface to open the Display settings configuration interface.
Update the display settings as required and click OK to save the settings.
Figure 12-92 Display Configuration Interface
Table 12-29 Display Configurations
Configuration Description
Resolution
Select from four options: 3840x2160, 1920x1080, 1280x1024
(default), 1280x720, and 1024x768.
Note: You need to reboot the NVR to activate changes to the resolution.
Transparency
Configure the transparency of the GUI display. Select from 0% to
100%.
Time
Display/Channel
Display
Click to enable these functions, which display the time and channel on
the video monitor.
Image Enhance Check to enable Image Enhance, to optimize the preview video.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet