Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
224
Groups
Click the Group tab in the Account configuration interface to open the Group configuration
interface.
Figure 12-101 Group Configuration Interface
Adding a Group
1. Click Add Group in the Group Account configuration interface.
Figure 12-102 Add Group Configuration Interface
2. Enter a Group name.
3. Select System, Playback, and Monitor privileges.
4. Click OK to save these new settings.
Modifying a Group
1. Click under Modify to open the Modify Group configuration interface.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet