Honeywell Performance Series User Manual

Web Client Operation
225
Figure 12-103 Modify Group Configuration Interface
2. Modify the Group privileges, then click OK to save the changes.
ONVIF User
You can add, edit, or delete ONVIF user accounts.
Go to SETUPSYSTEMACCOUNTONVIF User, the following window is displayed:
Figure 12-104 ONVIF User
The configuration for ONVIF User is very similar to the configuration for Username, see on
User
Name on page 222 for more information.
Configuring Security
1. Go to SETUPSYSTEMSECURITY, the following window is displayed:

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet