Performance Series Network Video Recorder User Guide
42
Image Size: The size is automatically selected, based on the resolution of the camera.
Image Quality: Select a value between 1 and 6, with 6 being the highest quality.
Interval: Select a value between 1 SPL (second per picture) and 7 SPL or click
Customized to enter your own setting.
3. Click Apply to save your settings.
4. To copy the settings to additional channels, click Copy, select the channels to which you
want to copy the settings, and then click Save.
Note
The NVR assigns event-activated snapshots a higher priority
than schedule-activated snapshots. If you have enabled both of
these types of snapshots, then the system activates an
activation snapshot when an alarm occurs. If there is no alarm,
then the NVR takes snapshots according to the schedule setup.
To Next Page
Loading...
Need help?
General