HP Integrity BL860c - DIMM Installation and Processor Replacement; Replacing a DIMM

Management Processor Lite 115
Table 9-2 Class: HP_ManagementProcessor
Property name Property implementation
URL The Uniform Resource Locator of the management
processor controller’s web-based user interface. This is
an MP http link. If an http link is not available, an MP
telnet link is shown.
Note: When a Management Processor is disabled
(refer to property EnabledState) URL is always reported
as https://0.0.0.0. Network communication with
the MP is not possible when the MP is disabled.
This is an MP http link. If an http link is not available,
an MP telnet link is shown.
SupportedProtocols An array of values indicating the protocols supported
by the management processor controller. It is assumed
that any protocol listed is active and can be utilized.
NICCondition Not Supported (always 0 - unknown)
ActiveLicense Not supported
LicenseKey Not supported
9.3.2CIM_SoftwareIdentity
CIM_SoftwareIdentity describes management processor firmware. The Windows-specific
implementation class is HP_MPFirmware. The following properties are implemented.
Table 9-3 Class: CIM_SoftwareIdentity
Property name Property implementation
CIM_ManagedElement
• Management Processor Firmware (Active)—for the
active MP
Caption
• Management Processor Firmware (Inactive)—for
the inactive or disabled MP
Description HP Management Processor Firmware FW Version
For example:
HP Management Processor Firmware (Active): version
B.004.001.001
ElementName The target type or firmware family. For example:
• Management Processor
• Integrated Lights Out (iLO)
• Integrated Lights Out 2 (iLO2)
CIM_ManagedSystemElement