HP Integrity BL860c - Booting HP-UX via EFI Shell

System fan 72
Table 5-13 Class: HP_SystemPhysicalFan
Property name Property implementation
PartComponent References HP_FanModule
5.3.14HP_Location
HP_Location is used to model fan locations on Integrity servers. The Windows implementation class is
HP_WinFanLocation.
Table 5-10 Class: HP_Location
Property name Property implementation
CIM_ManagedElement
Caption
Fan n:Location, where n represents the number of
the fan instance. For example, Fan 1:cabinet 0 –
blower 0.
Description
The location of the fan n:Location. Refer to fan
position Fan n:Location printed on the system.
ElementName
Fan n:Location, where n represents the fan position
printed on the system labeling. For example, Fan
1:cabinet 0 – blower 0.
CIM_Location
Name
Fan n , where n is the unique identifier for this fan
location instance.
PhysicalPosition
Fan n:Location, where n represents the number of
the fan instance. For example, Fan 1:cabinet 0 –
blower 0.
HP_Location
ElementLocationTag
Fan n:Location, where n represents the number of
the fan instance. For example, Fan 1:cabinet 0 –
blower 0.
ElementLocationTagDesc 0 (HoodTag)
5.3.15HP_ElementLocation
HP_ElementLocation is used to represent an association between CIM_Location and CIM_ManagedElement. The
Windows implementation class is HP_WinFanElementLocation
Table 5-11 Class: HP_ElementLocation
Property name Property implementation