Smart Array 212
Table 15-24 Class: HPSA_SCSIProtocolController (CIM_SCSIProtocolController)
Property name Property implementation
OperationalStatus[0] Operational status of the controller
• 0 (Unknown)
• 2 (OK)
• 6 (Error)
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_LogicalDevice
CreationClassName HPSA_SCSIProtocolController
DeviceID Opaque key
SystemCreationClassName HPSA_ArraySystem
SystemName HPSA_ArraySystem.Name
CIM_ProtocolController
MaxUnitsControlled 32
CIM_ SCSIProtocolController
HPSA_ SCSIProtocolController
15.3.24HPSA_RedundancySet
HPSA_RedundancySet represents controller redundancy if there is more than one controller in a
redundant configuration (for example MSA500 with two controllers.)
Table 15-25 Class: HPSA_RedundancySet (CIM_RedundancySet)
Property name Property implementation
CIM_ManagedElement
ElementName Storage System name and location (for example,
MSA500 in SystemCab03)
CIM_Collection
CIM_SystemSpecificCollection
InstanceID Opaque key
CIM_RedundancySet
LoadBalanceAlgorithm 2 (No Load Balancing)
To Next Page
Loading...
Need help?
General