HP Integrity BL860c - Hp_Memoryboard

System memory 85
Table 7-5 Memory Module Status
Condition OperationalStatus[0] OperationalStatus[1]
StatusDescriptions[0] StatusDescriptions[1]
• 2 (OK) • <not populated>
Memory module is operating
properly
• Memory module status: OK • <not populated>
• 2 (OK) • 15 (Dormant)
Memory module is present but is not
currently used by the operating
system
• Memory module status: OK • Memory module status:
Memory present but not in use
• 3 (Degraded) • 5 (Predictive Failure)
Memory module has correctable
errors exceeding the condition for
pre-failure warranty
• Memory module status:
Degraded
• Memory module status:
Correctable error threshold for
pre-failure warranty has been
exceeded
7.3.4HP_MemoryBoard
The class HP_MemoryBoard represents a physical memory board on Integrity servers. There is an
instance of this class for each memory board in the system. Empty memory board slots are not
instantiated.
For cellular systems, there is one HP_MemoryBoard instance for each cell board in the partition. For
non-cellular systems with memory extenders, there is one HP_MemoryBoard instance for each memory
extender. For non-cellular systems without memory extenders, there is one HP_MemoryBoard instance,
which represents the system board, because the memory modules are housed on the system board.
Table 7-6 Class: HP_MemoryBoard
Property name Property implementation
CIM_ManagedElement
One of the following:
Caption
• System Board
• Extender x
• Cabinet x Cell y
CIM_ManagedSystemElement
OperationalStatus Enumerator indicating the memory board operational
status.
• OperationalStatus[0]: contains overall memory
board status
• OperationalStatus[1]: contains detailed memory
board status (as needed)
For details, see the Memory Board Status.
• StatusDescriptions[0]: contains descriptive text per
OperationalStatus[0]:
StatusDescriptions
• StatusDescriptions[1]: contains descriptive text per
OperationalStatus[1]:
For details, see the Memory Board Status.