HP Integrity BL860c Datasheet

System Power Supply 56
4.3.8HP_SystemPowerSupply
HP_SystemPowerSupply is used to represent an association between HP_PowerSupply and the
computer system that contains this power supply. The Windows implementation class is
HP_WinSystemPowerSupply.
Table 4-9 Class: HP_SystemPowerSupply
Property name Property implementation
GroupComponent References HP_ComputerSystem
PartComponent References HP_PowerSupply
4.3.9HP_PowerSupplyModule
HP_PowerSupplyModule is used to model the physical power supplies on Integrity Servers. The
Windows specific implementation class is HP_PowerSupplyModule. Note: Power supply numbers for
existing instances do not change when other power supplies are added and removed.
Table 4-10
Class: HP_PowerSupplyModule
Property name Property implementation
CIM_ManagedElement
Power Supply n:Location,
where n represents
the number of the power supply instance.
Caption
Description Power Supply n:Location provides power for system.
StatusDescription, where n represents the number of the
power supply instance and StatusDescription represents
the value of StatusDescriptions[0].
ElementName Power Supply n:Location, where n represents the
number of the power supply instance.
CIM_ManagedSystemElement
• 2 (OK) – if power supply is operating properly
OperationalStatus[0]
• 6 (Error) – if power supply has failed
StatusDescriptions[0]
• Power Supply is operating properly –
if OperationalStatus[0] is 2 (OK)
• Power Supply has failed – if
OperationalStatus is 6 (Error)
• 5 (OK) – if power supply is operating properly;
HealthState
• 20 (Major Failure) – if power supply has failed
Name
Power Supply n, where n represents the number
of the power supply instance.
CIM_PhysicalElement
CreationClassName HP_PowerSupplyModule

HP Integrity BL860c Specifications

General

Brand	HP
Model	Integrity BL860c
Category	Server
Language	English