Smart Array 202
Table 15-12 Class: HPSA_StorageEnclosureProcessor (CIM_ComputerSystem)
Property name Property implementation
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_System
CreationClassName HPSA_StorageEnclosureProcessor
Name Opaque Key
NameFormat Other
OtherIdentifyingInfo[0] Port Number:BoxNumber to which the enclosure is
attached (for example, 1E:1). For dual port SAS disks,
both port numbers are displayed.
CIM_ComputerSystem
Dedicated[0] 2 (Other)
IdentifyingDescriptions[0] Other Vendor Specific Name
OtherDedicatedDescriptions[0] SDE—Indicates Storage Device Enclosure
HPSA_StorageEnclosureProcessor
15.3.12HPSA_PortController
HPSA_PortController represent the HBA in the host system. There is one instance per HBA. Note: This
class is not implemented for external subsystems (for example, MSA500).
Table 15-13 Class: HPSA_PortController (CIM_PortController)
Property name Property implementation
CIM_ManagedElement
ElementName Controller name and location (for example, Smart
Array in Slot 3)
CIM_ManagedSystemElement
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_LogicalDevice
To Next Page
Loading...
Need help?
General