Base server 23
Table 2-5 Class: HP_PowerManagementService Properties
Property name Property implementation
HP_PowerManagmentService
Table 2-6 Implemented Methods for HP_PowerManagementService Class
Method name Method implementation
RequestPowerStateChange Method parameters:
• PowerState – Input parameter of the new power
state requested. Supported values are: Power On
(2), Power Cycle Soft Off (5), and Power Off Soft
(8).
• ManagedElement – Input parameter with the
reference to the HP_WinComputerSystem instance
for the power state change.
The Time, Job and TimeoutPeriod parameters are not
supported and should be zero or NULL.
For more information, see the DMTF Power State
Management Profile (DSP01027).
2.3.5HP_PowerManagementCapabilities
HP_PowerManagementCapabilities extends the class CIM_PowerManagementCapabilities to model
the server power management capabilities. Only one instance of HP_PowerManagementCapabilities
is instantiated on an Integrity server.
The following properties are implemented.
Table 2-7 Class: HP_PowerManagementCapabilities Properties
Property name Property implementation
CIM_ManagedElement
Caption Power Management Capabilities
Description Power Management Capabilities
CIM_Capabilities
ElementName Power Capabilities 1
InstanceID Power Capabilities 1
CIM_PowerManagmentCapabilities
• PowerCapabilities[0]: 3 (Power State Settable),
indicating whether P_State is supported by the
system.
PowerCapabilities
• PowerCapabilities[1]: 4 (Power Cycling
Supported)
To Next Page
Loading...
