Base server 24
Table 2-7 Class: HP_PowerManagementCapabilities Properties
Property name Property implementation
• PowerChangeCapabilities[0]: 3 (Power State
Settable). This indicates that P_State is supported
by this system.
PowerChangeCapabilities
• PowerChangeCapabilities[1]: 4 (Power Cycling
Supported)
• PowerStatesSupported[0]: 2 (On)
PowerStatesSupported
• PowerStatesSupported[1]: 5 (Power Cycle (Off –
Soft) )
• PowerStatesSupported[2]: 8 (Off – Soft)
HP_PowerManagmentCapabilities
2.3.6HP_AssociatedPowerManagementService
HP_AssociatedPowerManagementService extends the class
CIM_AssociatedPowerManagementService and associates the HP_ComputerSystem instance with the
HP_PowerManagementService instance. Only one instance of
HP_AssociatedPowerManagementService is instantiated on an Integrity server.
The following properties are implemented.
Table 2-8 Class: HP_AssociatedPowerManagementService
Property name Property implementation
CIM_ServiceAvailableToElement
CIM_ AssociatedPowerManagementService
PowerState 2 (On)
RequestedState 12 (Not Applicable)
HP_AssociatedPowerManagementService
ServiceProvided ref: HP_PowerManagementService
UserOfService ref: HP_ComputerSystem
2.3.7HP_PowerManagementElementCapabilities
HP_PowerManagementElementCapabilities extends the class CIM_ElementCapabilities and associates
the HP_PowerManagementService instance and the HP_PowerManagementCapabilities instance.
Only one instance of HP_PowerManagementElementCapabilities is instantiated on an Integrity server.
The following properties are implemented.
Table 2-9 Class: HP_PowerManagementElementCapabilities
Property name Property implementation
To Next Page
Loading...
Need help?
General