HP Integrity BL860c - System Build-Up Troubleshooting Procedure

PCI Device 101
Table 8-2 Class: HP_PCIDevice
Property name Property implementation
Capabilities An array of integers that indicates controller
capabilities.
11: Provides Slot Identification
CapabilityDescriptions String describing the full location path of the PCI
device.
Examples:
Slot 2 (non-cellular systems)
Cabinet 8 Bay 0 Chassis 1 Slot 2 (cellular
systems)
ClassCode The basic function of the PCI device - some code other
than 6 (Bridge).
CIM_PCIDevice
BusNumber The bus number where this PCI device resides
DeviceNumber The device number assigned to this PCI device for the
bus
FunctionNumber The function number for this PCI device
PCIDeviceID PCI device ID as described in the configuration
registers for this PCI device
RevisionID Revision ID as described in the configuration registers
for this PCI device
SubsystemID Subsystem ID as described in the configuration
registers for this PCI device
SubsystemVendorID Subsystem Vendor ID as described in the configuration
registers for this PCI device
VendorID Vendor ID as described in the configuration registers
for this PCI device
HP_PCIDevice
8.3.2HP_PCIBridge
HP_PCIBridge is used to model PCI bridge devices on Integrity servers. There is an instance of this
class for each logical PCI bridge device that has been detected in the system.
Table 8-3 Class: HP_PCIBridge
Property name Property implementation
CIM_ManagedElement