HP Integrity BL860c - Hpscsi_Hbafirmwareidentity

SCSI HBA 405
Table 18-13 Class: HPSCSI_SPIPort (CIM_SPIPort)
Property name Property implementation
ElementName Controller name and location (for example, SCSI
Controller Port 1 in Slot 4)
Name Controller model name
CIM_ManagedSystemElement
OperationalStatus[0] Port status
• 0 (Unknown)
• 2 (OK)
• 6 (Error)
StatusDescriptions Description of the Operational Status (the reason why
OperationalStatus is set)
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not applicable)
RequestedState 12 (Not applicable)
CIM_LogicalDevice
CreationClassName HPSCSI_HBASPIPort
DeviceID Opaque key
SystemCreationClassName HPSCSI_HBAComputerSystem
SystemName HBA Index
CIM_LogicalPort
PortType 140 (Parallel SCSI)
UsageRestriction 3 (Back-end Only)
CIM_SPIPort
MaxDataWidth Max bus width (bits)
MaxTransferRate Max rate in bits per second
18.3.13HPSCSI_HBAFirmwareIdentity
HPSCSI_HBAFirmwareIdentity represents the firmware installed on a SCSI HBA controller.
Table 18-14 Class: HPSCSI_HBAFirmwareIdentity (CIM_SoftwareIdentity)
Property name Property implementation
CIM_ManagedElement
Caption SCSI HBA Firmware