HP Integrity BL860c Datasheet

System Power Supply 54
Table 4-4 Class: HP_PowerRedundancySet
Property name Property implementation
CIM_ManagedElement
Caption
Power Redundancy Set n, where n represents the
number of the redundancy set instance.
Description
Power Redundancy Set n is collection of fault
tolerant power supplies that provide redundant power.
n represents the number of the redundancy set instance
ElementName
Power Redundancy Set n, where n represents the
number of the redundancy set instance.
CIM_SystemSpecificCollection
HPQ:HP_WinPowerRedundancySet:<x>
InstanceID
Where x is a unique identifier for this power
redundancy instance (for example, 1, 2, …).
CIM_RedundancySet
MaxNumberSupported The maximum number of power supplies supported for
this redundancy set
MinNumberNeeded Not supported.
TypeOfSet 2 (N+1)
LoadBalanceAlgorithm 0 (Unknown)
• 0 (Unknown) – if the redundancy status is
unknown
RedundancyStatus
• 2 (Fully Redundant) – if the all power supplies in
the set are operating properly and enough to
achieve redundancy
• 3 (Degraded Redundancy) – if there are at least
enough power supplies for the redundancy set to
provide power, but power supplies have failed
• 4 (Redundancy Lost) – if there are not enough
power supplies required to achieve redundancy,
but there are enough for the redundancy set to
provide power
• 5 (Overall Failure) – if there are not enough
power supplies operating properly for the
redundancy set to provide power.
4.3.4HP_MemberOfPowerRedundancy
HP_MemberOfPowerRedundancy is used to represent an association between HP_PowerSupply and
HP_PowerRedundancySet. The Windows implementation class is
HP_WinMemberOfPowerRedundancy.
Table 4-5
Class: HP_MemberOfPowerRedundancy
Property name Property implementation

HP Integrity BL860c Specifications

General

Brand	HP
Model	Integrity BL860c
Category	Server
Language	English