FC HBA 297
16FC HBA
16.1Overview
This provider implements the HP FC HBA Profile which describes the behavior of Fibre Channel host
adapters supporting the SCSI (FCP) command set. A Fibre Channel adapter used in a host system is
called a Host Bus Adapter (HBA). An HBA is a physical device that contains one or more Fibre
Channel ports. A single system can contain one or more HBAs.
The following table details the profiles implemented and files installed by this provider.
Table 16-1 Overview
Implemented Profiles HP FC HBA Profile 1.0
Requirements HBAAPI.dll that supports the SNIA Common HBA API,
Version 2.18
Provider Installation Files Dll(s):
• HPWMISCSI.dll
• HPWMISCSIEventMsg.dll
• Cpqmdisk.dll
• Cpqmscsi.dll
• Cpqmsas.dll
• Cpqstmsg.dll
• Cpqstrutl.dll
• HPWMISRV.exe
• Hpwmistor.exe
MOF(s):
• HPFCA_Schema.mof
• HPWMIFCA.MOF
• HPWMIFCAErrorMetaData.mof
• HPWMIFCARegistration.mof
• HP_SAInterop.mof
• HP_SAStorage.mof
• HP_Storage.mof
16.2Use cases
Figure 1 shows an instance example of the HP FC HBA profile for a single HBA that contains two port
controllers with one FC port each. This instance example is used in all the following use cases.
To Next Page
Loading...
Need help?
General