HP Integrity BL860c - Hpsa_Arraycontroller

Smart Array 191
15.3.2HPSA_ArrayController
HPSA_ArrayController represents the controller. There is one per HBA and can have multiple
controllers for external subsystems.
Table 15-3 Class: HPSA_ArrayController (CIM_ComputerSystem)
Property name Property implementation
CIM_ManagedElement
ElementName Controller name and location
Examples:
• Smart Array in Slot 3, for internal
• Active Controller: MSA500 in SystemCab03, for
external
CIM_ManagedSystemElement
• Controller Serial Number
Name
• EMBEDDED – Reported if there is no Serial
Number for the local device (embedded on the
motherboard).
• PCISLOTSlot number – Reported if there is no
Serial Number for the local device (PCI occupies
a slot).
OperationalStatus[0] Status for Array Controller
• 0 (Unknown)
• 2 (OK)
• 6 (Error)
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_System
CreationClassName HPSA_ArrayController
NameFormat Other
CIM_ComputerSystem
Dedicated Dedicated[0]
0 (Not Dedicated)
HPSA_Arraycontroller
AcceleratorBackupPowerSource See HP Smart Array Profile
ADGSupported See HP Smart Array Profile
BatteryStatus See HP Smart Array Profile