HP Integrity BL860c - Hp_Etheventsettings

Ethernet Teaming 155
Table 13-23 Class: HP_ElementLocation
Property name Property implementation
CIM_ElementLocation
Key: Element ref:HP_EthernetPort
Key: PhysicalLocation ref:HP_Location
HP_ElementLocation
HP_WinElementLocation
13.3.23HP_EthEventSettings
HP_EthEventSettings models configurable Ethernet Indication settings. The Windows implementation
class is HP_WinEthEventSettings.
Table 13-24 Class: HP+EthEventSettings
Property name Property implementation
CIM_SettingData
Caption HP Ethernet Event Provider configurable settings for
Windows
Description HP Ethernet Event Provider configurable settings for
Windows
ElementName HP Ethernet Event Provider configurable settings for
Windows
Key:InstanceId 0
HP_EthEventSettings
HP_WinEthEventSettings
ActiveAdapterCountChanged If enabled, an event is generated when a change is
detected in number of active adapter count of a team.
Default: disabled.
FloodThreshold Time, in seconds, used for indication flood control.
Default: 10 seconds
InterfaceAvailable If enabled, an event is generated when a network
interface becomes available. Default: disabled.
InterfaceUnAvailable If enabled, an event is generated when a network
interface becomes unavailable. Default: disabled.
MaxFloodLevel Max number of events within Flood Threshold. Default:
100 events.
MemberJoinedTeam If enabled, an event is generated when an adapter
joins a team. Default: disabled.
MemberLeftTeam If enabled, an event is generated when an adapter
leaves a team. Default: disabled.