Blade System Lite 138
Table 12-8 Class: CIM_ElementSoftwareIdentity
Property name Property implementation
HP_BladeEnclosureElementFWIdentity
Antecedent ref: HP_BladeEnclosureFW
Dependent ref: HP_BladeEnclosureCS
12.3.8CIM_InstalledSoftwareIdentity
CIM_InstalledSoftwareIdentity associates a blade enclosure to its corresponding installed firmware.
The Windows-specific implementation class is HP_BladeEnclosureInstalledFWIdentity. The following
table lists the properties implemented.
Table 12-9 Class: CIM_InstalledSoftwareIdentity
Property name Property implementation
CIM_InstalledSoftwareIdentity
HP_BladeEnclosureInstalledFWIdentity
System ref: HP_BladeEnclosureCS
InstalledSoftware ref: HP_BladeEnclosureFW
12.3.9HP_Location
HP_Location is used to model the server blade location within an enclosure. The Windows specific
implementation class is HP_BladeCSLocation.
Table 12-10
Class: HP_Location
Property name Property implementation
CIM_ManagedElement
Caption (Rack)”abc” (UUID)”def” (Enclosure)“jkl”
(SerialNumber)”mno” (Bay)x
Description (Rack)”abc” (UUID)”def” (Enclosure)“jkl”
(SerialNumber)”mno” (Bay)x
ElementName (Rack)”abc” (UUID)”def” (Enclosure)“jkl”
(SerialNumber)”mno” (Bay)x
CIM_ManagedSystemElement
Name Unique identifier for this blade bay location instance.
For example: HPQ:HP_BladeCSLocation:Bay number
PhysicalPosition n, where n represents the blade bay slot position
printed on the enclosure labeling.
HP_Location
To Next Page
Loading...
Need help?
General