HP Integrity BL860c - Removing and Replacing System Board

Ethernet Teaming 142
Table 13-2 Class: HP_EthernetPort
Property name Property implementation
• 0 (Unknown)
RequestedState
• 2 (Enabled)
• 3 (Disabled)
• 4 (Shutdown)
• 5 (No Change)
• 6 (Offline)
• 7 (Test)
• 8 (Deferred)
• 9 (Quiesce)
• 10 (Reboot)
• 11 (Reset)
• 12 (Not Applicable)
Status
Status String. For example, OK and Error.
CIM_ManagedSystemElement
Name Physical Device Object (PDO) name (for example,
\Device\NTPNP_PCI0017)
HealthState 5 (OK) if port has link, 20 (Major Failure) otherwise
OperationalStatus[0] 2 (OK) if port has link, 6 (Error) otherwise
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled). Disabled ports are not modeled
EnabledState 5 (Not Applicable)
CIM_LogicalDevice
Key:CreationClassName HP_WinEthernetPort
Key:DeviceId System GUID for the port
IdentifyingDescriptions[] IdentifyingDescriptions[0] — Location
IdentifyingDescriptions[1] — Hardware location
IdentifyingDescriptions[2] — Spare part number
OtherIdentifyingInfo[0] Location string: Slot/CBHSS/Embedded Slot
Hardware Location string: Bus, device function
Spare part number
Key:SystemCreationClassName HP_ ComputerSystem.SystemCreationClassName
Key:SystemName HP_ComputerSystem.Name
CIM_LogicalPort
PortType Port Type. See CIM_EthernetPort mof for possible
values.
Speed The current bandwidth of the port in bits per second.
This property is conditional. It is populated if the data
is available.