HP Integrity BL860c - Page 240

Smart Array 240
Table 15-100 HPSA_DeviceIndication: Physical Drive status changed to OK
Property name Property implementation
• VariableNames[0]: FailureDescription
VariableNames
• VariableNames[1]: LastFailureDescription
• VariableNames[2]: DriveInterface
• VariableTypes[0]: 1 (String)
VariableTypes
• VariableTypes[1]: 1 (String)
• VariableTypes[2]: 4 (uint16)
• VariableValues[0]: Short Description of failure
VariableValues
• VariableValues[1]: Short Description of last failure
• VariableValues[2]: HPSA_DiskDrive.DriveInterface
• 3 (Enclosure) for c-Class blade systems
ImpactedDomain
• 4 (System) for all other systems
When ImpactedDomain is 3 (Enclosure), the properties
indicated with (*) are populated.
BladeBay * HP_BladeCSLocation.LocationInformation[0]
BladeName * HP_ComputerSystem.Name
EnclosureName * HP_BladeEnclosureCS.Name
RackName * Rack name if one exists
RackUID * Rack Unique Identifier if one exists
SystemVirtualSerialNumber Conditional property containing the virtual system
serial number string when running in a Virtual Connect
environment.
SystemVirtualUUID Conditional property containing the virtual system
UUID when running in a Virtual Connect environment.
HP_HardwareIndication
HWFirmwareVersion Physical Disk firmware version string
HWLogicalLocation Physical Disk Location string
For example, Port:1E Box: 1 Bay: 5
HWPhysicalLocation Physical Location of the Failed Drive (Bay Number)
DeviceControllerLogicalLocation Controller Location
For example, SmartArray 642 in Slot 2
HWManufacturer Compaq
HWSerialNumber Physical Disk Serial Number
HP_DeviceIndication
DeviceModel Physical Disk Model string