HP Integrity BL860c - Page 343

SAS HBA 343
Table 17-23 Class: HPSAS_StorageCapabilities (CIM_StorageCapabilities)
Property name Property implementation
• For Primodial Pools
ElementName
Controller name and location. For example, HP 8
INT Port SAS/SATA HBA in Slot 3 for internal.
• For Concrete Pools
Controller name and location:Array identifier. For
example, HP 8 INT Port SAS/SATA HBA in Slot 3:
Storage Pool for internal.
CIM_Capabilities
InstanceID Opaque key
CIM_StorageCapabilities
• 0 (When Pool is NonRAID)
DataRedundancyDefault
• 1 (When number of drives = 1)
• 2 (When number of drives > 1) For example, Pool
can be configured for redundancy.
• 0 (When Pool is NonRAID)
DataRedundancyMax
• 1 (When number of drives = 1)
• 2 (When number of drives > 1) For example, Pool
can be configured for redundancy.
• 0 (When Pool is NonRAID)
DataRedundancyMin
• 1 (No single point of failure RAID)
DeltaReservationDefault 0
DeltaReservationMax 0
DeltaReservationMin 0
ElementType 5 (Storage Pool)
• True—When number of drives > 1 (For example,
Pool can be configured for redundancy.)
NoSinglePointOfFailure
• False—When number of drives = 1 or Pool is
NonRAID
• True—When number of drives > 1 (For example,
Pool can be configured for redundancy.)
NoSinglePointOfFailureDefault
• False—When number of drives = 1 or Pool is
NonRAID
• 0 (When Pool is NonRAID)
PackageRedundancyDefault
• 1 (When number of drives = 1)
• 2 (When number of drives > 1)
• 0 (When Pool is NonRAID)
PackageRedundancyMax
• 1 (When number of drives = 1)
• 2 (When number of drives > 1)
PackageRedundancyMin 0
HPSAS_StorageCapabilities