System memory 81
Table 7-2 Class: HP_Memory
Property name Property implementation
Caption System Memory
Description Logical system memory
ElementName System Memory
CIM_ManagedSystemElement
OperationalStatus Enumerator indicating the logical system memory
operational status. The status represents the ‘worst-of’
algorithm for all OperationalStatus[0] values reported
by physical memory modules in HP_MemoryModule
instances.
• OperationalStatus[0] (shown in order of
increasing severity; a higher severity overrides a
lower severity):
○ 2 (OK), when all physical memory modules
report 2 (OK)
○ 0 (Unknown), when any physical memory
module reports 0 (Unknown)
○ 3 (Degraded), when any physical memory
module reports 3 (Degraded)
This status does not represent the overall status of the
memory system; refer to the HP_MemoryCollection
class for overall memory system status.
StatusDescriptions StatusDescriptions[0] contains descriptive text per
OperationalStatus[0]:
• System memory status: OK
• System memory status: Unknown
• System memory status: Degraded
• 5 (OK), when OperationalStatus[0]=2 (OK)
HealthState
• 0 (Unknown), when OperationalStatus[0]=0
(Unknown)
• 10 (Degraded/Warning), when
OperationalStatus[0]=3 (Degraded)
Name System Memory
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_LogicalDevice
CreationClassName HP_WinMemory
DeviceID HPQ:HP_WinMemory:001
SystemCreationClassName same value as property
HP_ComputerSystem.CreationClassName
To Next Page
Loading...
