5. After the disengaging operation of the feed rollers is normal, the stapler/stacker driver drives the
jogger motor (M1302) and shifts the jogger guide from the turn-out position to the waiting
position.
Belt
Waiting position
Turn-out position
Jogger guide
To
view
Figure 4-41 Jogger guide
6. When the jogger guide is shifted to the waiting position, the stapler/stacker driver rotates M1301
counter-clockwise again to engage the upper and the lower delivery rollers.
PS1301
Inlet roller
Paddle
Delivery tray
Upper delivery roller
Lower delivery
roller
Upper delivery guide
Delivery roller
Jogger guide
Figure 4-42 Staple-mode feed operation
7. After the leading edge of the paper reaches the paper inlet sensor (PS1301), the stapler/stacker
driver changes the feed speed of the M1303 to synchronize it with that of the stapler/stacker.
174 Chapter 4 Theory of operation ENWW
To Next Page
Loading...