11. The stapler/stacker driver changes the speed of the feed motor (M1303).
●
If it is not the last sheet of paper, the driver drives the feed motor at the printer speed.
●
If it is the last sheet of paper, the driver stops the feed motor.
12. The stapler/stacker driver drives the motors to perform the alignment operation.
●
Horizontal alignment: Drives M1302 and performs the jogger operation.
●
Vertical alignment: Drives M1301 and performs the paddle operation.
Through these alignments, the paper is correctly positioned on the jogger tray.
PS1301
Inlet roller
Paddle
Delivery tray
Upper delivery roller
Lower delivery
roller
Delivery roller
Jogger guide
Figure 4-45 Staple-mode feed operation
176 Chapter 4 Theory of operation ENWW
To Next Page
Loading...