The stapler/stacker driver controls the jogger motor (M1302), which allows the jogger guide to move
so it can align the edge of the paper.
M1302
Staple stacker driver PCB
Jo
er
uide
Belt
Jogger gear
JOGGER MOTOR DRIVE signal
Figure 4-49 Jogger operation
The jogger operation is explained in the following procedure.
1. Before the start of the operation, the jogger guide is stationed at the home position (turn-out
position).
Home position
Jogger guide
(Top view)
Figure 4-50 Jogger operation
ENWW Stapler/stacker system 179
manuals4you.commanuals4you.com
To Next Page
Loading...