2. At the start of the feeding process in staple mode, the stapler/stacker driver rotates M1302
counter-clockwise after it detects that the upper deliver roller is disengaged. It then moves the
jogger guide to the waiting position.
Waiting potion
(Top view)
Print paper
Figure 4-51 Jogger operation
3. Within a prescribed period of time after the trailing edge of the paper passes the paper-inlet
sensor (PS1301) (when the paper covers the entire jogger guide), the stapler/stacker driver
rotates M1302 counter-clockwise to move the jogger guide to the aligned position (adjusted to
the width of the paper). The edge of the paper is aligned in the horizontal direction.
Alignment position
(Top view)
Print paper
Figure 4-52 Jogger operation
180 Chapter 4 Theory of operation ENWW
To Next Page
Loading...