This section shows the hours on which the Target Appliance is available for
replication during the week. Any blackout windows that have been specified
will be reflected in this calendar.
Weekly calendar
Table 16 Source appliance parameters
Source Appliance tab No fields are editable.
This is the name of the Source Appliance.
Appliance Name
This is the IP address of the Source Appliance.
Appliance Address
This is the serial number of the Source Appliance.
Serial Number
This field indicates whether the Source Appliance is available.
Available
This shows the capacity of the Source Appliance.
Capacity
This shows the amount of free space on the Source Appliance.
Free Space
This shows the firmware version of the Source Appliance.
Firmware version
Local Settings (Replication)
This page allows you to view and configure replication ports and blackout windows. You can also
enable bandwidth limiting.
Configure blackout windows
This option allows you to specify times when replication should not occur, for example during planned
maintenance or heavy network traffic.
D2D Backup System HP D2D4112 137
To Next Page
Loading...
Need help?
General