4. Make a note of the Initiator Node Name (this can be found on the General tab on the Microsoft
iSCSI initiator).
5. Modify the target library to see the new machine name of the restored host. Select the Devices
page on the Web Management Interface, and put the target library into Edit mode. Copy the
host’s Initiator Node Name (found on the General tab in step 4 ) into iSCSI Initiator Name.
NOTE:
If you have used the Secret option on the iSCSI Initiator to enter an authentication string,
you must enter the same information on the Web Management Interface. See
“iSCSI (Status)” on page 129.
D2D Backup System HP D2D4112 175
To Next Page
Loading...
Need help?
General