HPE FlexNetwork 5510 HI Series User Manual

534
LS
basic BGP LS configuration, 295
BGP link state (LS) configuration, 295
BGP LS route reflection configuration, 296
IPv4 BGP link state (LS) configuration, 342
LSA
OSPF AS External LSA, 66
OSPF ASBR summary LSA, 66
OSPF exit overflow interval, 91
OSPF LSA arrival interval, 87
OSPF LSA generation interval, 87
OSPF LSA retransmission packet timer, 85
OSPF LSA transmission delay, 86
OSPF LSDB external LSAs max, 90
OSPF network LSA, 66
OSPF network summary LSA, 66
OSPF NSSA LSA, 66
OSPF opaque LSA, 66
OSPF outbound LSA filtering (specified
neighbor), 97
OSPF router LSA, 66
OSPF Type-3 LSA filtering, 81
OSPFv3 AS external LSA, 412
OSPFv3 grace LSA, 412
OSPFv3 inter-area-prefix LSA, 412
OSPFv3 Inter-Area-Prefix LSA filtering, 419
OSPFv3 inter-area-router LSA, 412
OSPFv3 intra-area-prefix LSA, 412
OSPFv3 link LSA, 412
OSPFv3 LSA generation interval, 423
OSPFv3 LSA transmission delay, 422
OSPFv3 network LSA, 412
OSPFv3 NSSA LSA, 412
OSPFv3 router LSA, 412
LSAck
OSPF LSAck packet, 66
OSPFv3 packet type, 412
LSDB
IPv6 IS-IS LSDB overload bit, 468
IS-IS LSDB overload bit, 154
OSPF LSDB external LSAs max, 90
LSP
IS-IS ATT bit Level-1 LSP, 155
IS-IS LSP flash flooding, 152
IS-IS LSP fragment extension, 153
IS-IS LSP length, 152
IS-IS LSP parameters, 151
IS-IS LSP timers, 151
IS-IS PDU type, 139
IS-IS route summarization, 145
LSR
OSPF LSR packet, 66
OSPFv3 packet type, 412
LSU
OSPF LSU packet, 66
OSPF LSU transmit rate, 93
OSPFv3 LSU transmit rate, 426
OSPFv3 packet type, 412
M
MAC addressing
routing policy MAC list, 492, 495
maintaining
BGP, 297
IP routing table, 8
IPv6 PBR, 487
IS-IS, 165
OSPF, 104
OSPFv3, 435
PBR, 373
RIP, 43
RIPng, 398
routing policy, 499
managing
BGP large scale network management, 198
manual
BGP route summarization (IPv4), 228
BGP route summarization (IPv6), 228
mapping
IS-IS system ID > host name mapping, 155
IS-IS system ID > host name mapping (dynamic),
156
IS-IS system ID > host name mapping (static),
155
matching
IPv6 PBR if-match clause, 484
IPv6 PBR node match criteria, 485
PBR deny match mode, 370
PBR if-match clause, 370
PBR node match criteria, 371
PBR permit match mode, 370
routing policy if-match clause, 493, 496
MD5
BGP peer MD5 authentication, 265
MED
BGP attribute configuration, 245
BGP MED default value, 246
BGP MED route comparison (confederation
peers), 249
BGP MED route comparison (diff ASs), 247
BGP MED route comparison (per-AS), 247

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English